HVAC installations, incl. hot water sealed-system boilers and unvented cylinders, require discharge devices for P/TRVs (Pressure/Temperature Relief Valves). Critical for compliance, safety, efficiency and maintenance. The hotun® dry-trap tundish with the hotun detect® audible/visual alarm unit sets a new standard for best practice.
You can terminate to an internal waste or soil pipe and you will need a tundish followed by a trap:
- A wet trap will dry out then toxic fumes can enter a living space.
- A membrane trap is a great solution but it takes up space, is expensive and you cannot see inside should it be blocked or fail.
The hotun® dry trap tundish is your best practice option:
- Smallest solution in class (from 73mm between pipes) with comprehensive options (size, colour, fittings, etc);
- World first patented hot water solution, award winning, accepted for use by major manufacturers (e.g., Worcester Bosch, Vaillant, Ideal, Ariston, OSO and many more)
- Independently tested and approved, also flow-rate tested
- Open-sided, enabling visibility of water even if no longer passing
- Maintenance in situ without disconnection from the pipework
- Single piece construction (welded to prevent failure)
- Full air break to drain standard is met incl. backflow test
- 10 year warranty
- Unique alarm option enables compliance with G3 to support impaired users
- The alarm restores visibility at point of discharge and alerts to passing water when an installation is behind a door or panelling
- Can prevent boiler lock-out and can save wasted energy and water
hotun® Its not just a tundish!
For more information you can visit the hotun® website or you can call their technical helpline on 01332 702678 or visit: www.hotun.co.uk